![]() There is a great community with many mods available for that router. While the SoC is the same, it comes with an audio card (analog and digital outputs), so the firmware I have created needs to be compiled with the additional driver/s in it. UPDATE – Added firmware downloaded (15-1-2015). ![]() Use with caution, and comes with no warrentees: upgrade-1.1.01-A21(A.01).bin #SOUNDMATE ST200 AUDIO BAD UPDATE# This entry was posted in General News, Hardware, Tech and tagged openwrt, SoundMate, WR703n by Kristian. Today we take a look at a WiFi-based music streaming device that hooks up to any stereo or other playback devices that supports an RCA, 3.5mm line-in, 1/4″ (adapter not included) or optical input. This device is developed by Uyesee, a company based in China, and is referred to as “ SoundMate” the “WiFi Music Streaming Receiver”. It will even work in the car since it is powered via USB. The device itself is very small and fits in the palm of your hand. It has a small removable antenna (or upgradable if you see the need) along with USB, line-out and SPDIF (optical). It comes with a line-out cable (3.5mm to 3.5mm) as well as a line-out to RCA for connecting it to your playback device. You will also find a micro-USB to USB cable for charging (the actual charger is not included, so you will either have to connect it to an available USB port on a PC or use one an adapter from another device). You start off by powering the device and hooking it up to your playback device. After that, you need to connect to it from your mobile device or laptop via WiFi as if it was a router. The SSID is available on the bottom of the device.įrom here you have two choices. You can play directly to the device using it as its own WiFi source, or you can add it to your main WiFi network. ar7240_i2s kernel driver provides support for audio DAC that is connected over i2s bus to AR9331 SoC.To do that, once you have connected to the device via WiFi, you will open a browser and point it to the IP address that is (also) listed on the bottom of the device (note: the instructions may list a different IP like it did for us, but most likely the one printed on the bottom of the device is the correct one). updatefw is obviously firmware upgrade tool which look if new firmware is put on usb and then it updates current firmware. Rc.local script has few interesting thing, first part with if statement is to mount external usb devices. Mount -t exfat -o fmask=000,dmask=000,iocharset=utf8 /dev/$device /tmp/mnt/disk-$m Mount -o fmask=000,dmask=000,iocharset=utf8 /dev/$device /tmp/mnt/disk-$m Ntfs-3g -o nls=utf8 /dev/$device /tmp/mnt/disk-$m ![]() # Put your custom commands here that should be executed once I'm not sure what nsrender does, does it complement shairtunes or is it a separate tool. ![]() Wifi options need a bit more investigating.Ĥ32 root 1552 S /proc/cpuinfoġ660 root 1520 D sh -c ps -w |grep friendly-name | grep -v grep|wc -l It is strange to see eth0 port configured when this device is missing RJ45 connector. Listing of services shows that this device is using all Open source tools, main tool that enables music streaming is shairport which emulates Apple Airplay service. Overlayfs:/overlay 1.0M 64.0K 976.0K 6% /īy looking at free drive space we see that there is 976K of free space for any additional tools or scripts. So this device had 64Mb of ram, and more than half of it is free.įilesystem Size Used Available Use% Mounted on Telnet to device, and use "root" for username and "ifconfig" for password. Actually I'm puzzled how come we have just started to see consumer products use OpenWrt. OpenWrt is a not your average embedded OS, it is fully featured Linux with hundreds of packages which you can install with ease. In this article I'll do a bit of digging under the skin and do some reverse engineering of SoundMate M1 audio streaming device.
0 Comments
Leave a Reply. |